Types of Recycled Plastic Composite

Plastic/waste wood fiber

Composites made of recycled polyvinyl chloride or high density polyethylene plastics and waste wood fiber have the dimensional stability and thermal performance of wood, and the uniformity and decay resistance of plastics. The percentage of recycled plastic to wood is typically about 50/50. However other ratios can be developed, depending upon the final application. Typically processing aids and foaming agents are incorporated to achieve processability and to control the density of the finished product. Composite plastic can be used for manufacture of :

• Plastic lumber

• Plastic wood

• Recycled plastic lumber

• Wood plastic composite

• Plastic product wood

• Composite panel plastic wood

• Plastic product wood

 Recycled Plastic /Rubber Composite

Recycled plastic rubber composite is relatively new to the market. This material is composed of about 50 percent plastic and 50 percent recycled tire crumb. The material, used originally for commercial applications such as flooring in livestock trailers, is tough, durable, and impervious to water, insects, and UV rays.
The  plastic rubber composite has the advantage of being completely resistant to rot, because it bears no celulostic fiber as does the wood plastic composite.Composite plastic/rubber can be used for manufacture of :

• Plastic lumber

• Plastic wood

• Roofing shingles

• Flooring

• Trailed floors

• Composite extruded panel plastic wood    

• Composite panel plastic wood   

• Plastic product wood

• Decking lumber plastic   

Plastic Composite Equipment

Twin screw extruders with corotating, intermeshing, segmented screws, and  equipped with a vacuum pump for degassing, with cylinder cooling and screw cooling is the ideal machines for the preparation of plastic composite blends which contain reinforcing wood fiber or other reinforcements.   Two or more volumetric dispensers  can be used to supply the  different materials in the ratio required in order to maintain a consistent blend. At least two vacuum ports are recommended to insure degassing of volatiles.