Machinery & Equipment for
Manufacturing Plastic Lumber
Machinery and equipment for
manufacturing plastic lumber is typically made to order by the equipment
supplier. Many suppliers use only
new equipment . However
considering the variations in the recovered plastic other suppliers have
elected to use good
remanufactured plastic lumber equipment in
order to minimize the investment required. It is estimated that used rebuilt
equipment will cost only fifty percent of the price of new
equipment. the following line is an example of equipment available assembled and ready to produce.
Cierra Plastic Lumber line:
One CINCINNATI MILACRON MODEL CM65, 65 MM, Conical
counter rotating twin screw extruder. MFG. 1999 used less than one year,
New Barrel Unused set of extra screws, moly coated
50 HP DC
drive and motor
11 Zone Control Panel,
One Profile Die for
6" Decking Wood (per Customer Specifications).
Die will consist of die
approach, clamp and approximately 3 feet of cooling land.
One
CIERRA Stainless Steel Vacuum Calibration Tank,
400 mm W x 400 mm
Deep, 3m . L,
1 vacuum chamber
5 HP vacuum pump NEW
One CIERRA Stainless
Steel Cooling Tank, 400 mm W x 400 mm Deep,
6 m. Long
Fitted with fill
and drain plumbing NEW
One CIERRA 2- Belt Puller, having
1800 mm of belt contact,
250 mm Wide,
7 HP Variable speed drive
NEW
One Traveling Automatically Air-actuated Cutoff Saw, Mfg., by
Gatto, having
450 mm diameter cutting blade, with 5 HP Motor.
NEW
One 12 ft Long Dump Table, NEW
Material
fed by 2 Ackerson proportional feeders with variable speed
controls.
Containing mixers and augers.
1 color additive
mixer.
Price for Above Line
$187,800 FOB
Installation and formulation package at extra cost
Included: formulation, equipment set up supervision, operator
training.
All equipment carries new equipment warrantee (will be supplied
with formal proposal)
If you have further questions please address them to
pvan123@aol.com.
Questions concerning equipment for plastic recycling equipment or plastic
lumber will be answered as soon as possible.
|
